Things that car owners should pay attention to when replacing TCM Or TCU Or ECU

The products of Transmission Control Module (TCM Or TCU) manufacturers will slowly damage during the braking process of the car, and they should be used as spare parts. If the driver can't find the Transmission Control Module (TCM Or TCU) to pay attention to the wear of the Transmission Control Module (TCM Or TCU), it will not only cause safety hazards due to the reduction of the braking effect, but also seriously endanger the safety of the occupants, so it should be treated with caution. Among the many issues below, the importance of TCM Or TCU Or ECU is the most important in daily inspection and protection:

1. Under appropriate driving standards, the Transmission Control Module (TCM Or TCU) manufacturer will face the factory inspection twice every 6,000 kilometers. In the wound inspection, not only the remaining thickness must be measured, but also the damage of the brake pads must be checked. Compare whether the degree of damage of the TCM Or TCU Or ECU on both sides is the same, whether it is easy to return, etc. If any abnormality is found, it must be solved immediately.
2. TCM Or TCU Or ECU are generally composed of steel linings and friction materials. There is no need to wait for the friction material to wear before removing the Transmission Control Module (TCM Or TCU). Some cars have a brake system alarm function. If the damage limit is exceeded, the digital display will sound an alarm to remind you to replace it. The products of Transmission Control Module (TCM Or TCU) manufacturers exceed the use limit and must be replaced. Even if it can be used for a period of time, it will reduce the braking effect and endanger driving safety.
3. When the Transmission Control Module (TCM Or TCU) is disassembled and replaced, it must be replaced with qualified brake pads produced by reliable manufacturers. The method of making the braking effect between the Transmission Control Module (TCM Or TCU) and the brake disc is the most appropriate method without causing damage.
4. When removing and replacing the brake pads, the brake cylinder must be pushed back with a maintenance tool. Do not use other crowbars to press it back hard, otherwise it may cause the brake caliper guide screw to bend and cause the brake pad to get stuck.
5. After replacing the Transmission Control Module (TCM Or TCU) manufacturer's product, just step on the brake to clear the gap between the Transmission Control Module (TCM Or TCU) and the brake disc, and the Transmission Control Module (TCM Or TCU) needs to travel 150 kilometers to exceed the excellent braking effect.